Popular Post BR46 Posted September 16, 2020 Popular Post Share #1 Posted September 16, 2020 Fired up the sidecar today with a different motor today. It's actually 3 different motors put together so we can race the final race of the year. The motor only has to last one weekend. Than I have a few months to build a monster motor for next year. 10 3 Link to comment Share on other sites More sharing options...
Randomguy Posted September 16, 2020 Share #2 Posted September 16, 2020 That sounds very resourceful! Link to comment Share on other sites More sharing options...
Kzoo Posted September 16, 2020 Share #3 Posted September 16, 2020 Reminds me. Yesterday on my bike ride at lunch I saw a cute young lady on a pink scooter (maybe a Vespa but who noticed) with a matching pink side car and she sported a matching pink helmet. Sorry but I thought of you @BR46 1 2 Link to comment Share on other sites More sharing options...
team scooter Posted September 16, 2020 Share #4 Posted September 16, 2020 TTIWWS! Lets hear that bad boy. Link to comment Share on other sites More sharing options...
BR46 Posted September 16, 2020 Author Share #5 Posted September 16, 2020 1 hour ago, Kzoo said: Reminds me. Yesterday on my bike ride at lunch I saw a cute young lady on a pink scooter (maybe a Vespa but who noticed) with a matching pink side car and she sported a matching pink helmet. Sorry but I thought of you @BR46 What made you think of me? Was it the pink helmet? The Vaspa? The cute chick? The pink sidecar? 1 Link to comment Share on other sites More sharing options...
Popular Post BR46 Posted September 16, 2020 Author Popular Post Share #6 Posted September 16, 2020 1 hour ago, team scooter said: TTIWWS! Lets hear that bad boy. It's nothing special. It's pretty much stock pistons, stock cylinders just a the head off the motor that we wrecked in South Carolina and a junkyard bottom end. It's just a motor to get us through the final race of the year. I will be happy with a top 5 finish with this motor. Next year I hope to have a motor that will compete with the BMWs 3 2 Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted September 16, 2020 Share #7 Posted September 16, 2020 How'd the engine rebuild go? I see you posted that answer just as I posted the question. 1 Link to comment Share on other sites More sharing options...
Bikeguy Posted September 16, 2020 Share #8 Posted September 16, 2020 It looks like you ride almost in a superman position, stretched out over the motor. So, when a motor self destructs at a high rpm, you must be inches away from the top of the engine. Do most (hopefully all) motors stay structurally together and the parts remain inside the motor? I recall years ago, at a blower explosion at a drag race, years before some safety items were used, and the blower flew up and over the spectator stands. Are the stock pistons forged or cast? Link to comment Share on other sites More sharing options...
Longjohn ★ Posted September 16, 2020 Share #9 Posted September 16, 2020 7 minutes ago, Bikeguy said: Are the stock pistons forged or cast? Forged pistons rock. I used to forge pistons the size of crock pots. 1 1 Link to comment Share on other sites More sharing options...
Popular Post BR46 Posted September 17, 2020 Author Popular Post Share #10 Posted September 17, 2020 2 hours ago, Bikeguy said: It looks like you ride almost in a superman position, stretched out over the motor. So, when a motor self destructs at a high rpm, you must be inches away from the top of the engine. Do most (hopefully all) motors stay structurally together and the parts remain inside the motor? I recall years ago, at a blower explosion at a drag race, years before some safety items were used, and the blower flew up and over the spectator stands. Are the stock pistons forged or cast? What I in the motor at the moment are cast pistons. Funny story about top fuel....We were racing in Ohio when I guy was checking out the sidecar who use to race top fuel drag bikes. When Wo46 stepped out of the motorhome the guy who raced top fuel said. .......You ride that thing.......you're fucking nuts. I laughed and said but you ride a 200 mph nitro methane bomb and you think that she's nuts. This type of sidecar is called a kneeler sidecar. I don't sit on it you are kneeling on it to drive it and yes I'm pretty much laying on top of the motor. 1 4 Link to comment Share on other sites More sharing options...
Bikeguy Posted September 17, 2020 Share #11 Posted September 17, 2020 The more I think about it.... this would fall into the NO category for me. No way would I do this, along with not jumping out of perfectly good airplanes. I don't think your nuts... this is just too much for me. The guy on a top fuel bike... yeah he's nuts. I've seen too many motors running top fuel blow up. Back in 1977 when I purchased my fist car, a black Z28 Camaro (of course with a 4 speed) the guy asks, 'Do you want T-tops?' I told him, 'No. When I roll it over I want steel above my head.' And I was serious. When I drove the car home, that was the first day I started wearing a seat belt. I knew I'd probably get into trouble. (never did) The one thing I liked about seat belts back then, when you cinched them tight, they stayed tight. I found that held me in the seat, and I could go around corners faster. 1 Link to comment Share on other sites More sharing options...
BR46 Posted September 17, 2020 Author Share #12 Posted September 17, 2020 28 minutes ago, Bikeguy said: When I roll it over I want steel above my head.' People say that they can't believe that there's nothing to hold the monkey on the sidecar. I tell them if you flip you don't want to be attached to the sidecar. That what what's scary about F-1 sidecars if it flips the driver is trapped in side. I've seen one flip at 130+ and was sliding upside down with the driver trapped. 1 Link to comment Share on other sites More sharing options...
Bikeguy Posted September 17, 2020 Share #13 Posted September 17, 2020 1 minute ago, BR46 said: I've seen one flip at 130+ and was sliding upside down with the driver trapped. That can't be good at all... for many reasons... Was the driver OK?? Link to comment Share on other sites More sharing options...
BR46 Posted September 17, 2020 Author Share #14 Posted September 17, 2020 3 minutes ago, Bikeguy said: That can't be good at all... for many reasons... Was the driver OK?? Black and blue and a broken collarbone. Link to comment Share on other sites More sharing options...
Bikeguy Posted September 17, 2020 Share #15 Posted September 17, 2020 Just now, BR46 said: Black and blue and a broken collarbone. That's way better than I expected. I'm sure it hurt like hell for a while. Link to comment Share on other sites More sharing options...
Ralphie ★ Posted September 17, 2020 Share #16 Posted September 17, 2020 I am always amazed that wobr46 does that! Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted September 17, 2020 Share #17 Posted September 17, 2020 Having played with the nitro bombs for a while I've many scary stories from the days we were learning about safety devices. Today's FC are a bit longer but back in the day, the driver essentially sat in a position that put the bellhousing between his/her knees and the transmission in the crotch. We had no transmission or bellhousing armor, using what amounted to a Chrysler torqueflight automatic transmission (2 gears out of 3 manually shifted). It was not under the floor boards. It was part of the floor so there was a thin transmission case between all those rotating parts and your essential areas. Later when clutches were installed, armored steel bellhousings were used. Don Garlits who basically invented the rear engine top fuel dragster did so after losing the toes on one foot during an engine explosion between his feet and legs. Somewhere in my collection I had a pic of an explosion in Paula Murphy's FC where the flywheel assembly could be seen departing through the roof of the car. Knowing where that flywheel went as it exited left her a bit shaken. Link to comment Share on other sites More sharing options...
Parr8hed Posted September 17, 2020 Share #18 Posted September 17, 2020 Glad you got it back together. Is there a size limit on cc? I know that you said it had to be a twin. Link to comment Share on other sites More sharing options...
Mr. Silly Posted September 17, 2020 Share #19 Posted September 17, 2020 8 hours ago, BR46 said: What I in the motor at the moment are cast pistons. Funny story about top fuel....We were racing in Ohio when I guy was checking out the sidecar who use to race top fuel drag bikes. When Wo46 stepped out of the motorhome the guy who raced top fuel said. .......You ride that thing.......you're fucking nuts. I laughed and said but you ride a 200 mph nitro methane bomb and you think that she's nuts. This type of sidecar is called a kneeler sidecar. I don't sit on it you are kneeling on it to drive it and yes I'm pretty much laying on top of the motor. That looks terrifying. Link to comment Share on other sites More sharing options...
BR46 Posted September 17, 2020 Author Share #20 Posted September 17, 2020 1 hour ago, maddmaxx said: Having played with the nitro bombs for a while I've many scary stories from the days we were learning about safety devices. Today's FC are a bit longer but back in the day, the driver essentially sat in a position that put the bellhousing between his/her knees and the transmission in the crotch. We had no transmission or bellhousing armor, using what amounted to a Chrysler torqueflight automatic transmission (2 gears out of 3 manually shifted). It was not under the floor boards. It was part of the floor so there was a thin transmission case between all those rotating parts and your essential areas. Later when clutches were installed, armored steel bellhousings were used. Don Garlits who basically invented the rear engine top fuel dragster did so after losing the toes on one foot during an engine explosion between his feet and legs. Somewhere in my collection I had a pic of an explosion in Paula Murphy's FC where the flywheel assembly could be seen departing through the roof of the car. Knowing where that flywheel went as it exited left her a bit shaken. I was at Union Grove dragaway in 1979 when 3 spectators were killed when a clutch and flywheel came out of a car and went into the stands. 20 minutes ago, Parr8hed said: Glad you got it back together. Is there a size limit on cc? I know that you said it had to be a twin. The max is 750cc with stock valve size and a maximum carburetor size 34mm round slide. If I was to put 36mm carbs on it would put in the next class up. That would mean that I would then have to build a bigger motor and spend more money to be competitive. 1 Link to comment Share on other sites More sharing options...
Parr8hed Posted September 17, 2020 Share #21 Posted September 17, 2020 2 minutes ago, BR46 said: I was at Union Grove dragaway in 1979 when 3 spectators were killed when a clutch and flywheel came out of a car and went into the stands. The max is 750cc with stock valve size and a maximum carburetor size 34mm round slide. If I was to put 36mm carbs on it would put in the next class up. That would mean that I would then have to build a bigger motor and spend more money to be competitive. So if carb and valve sizes are maxed out then what do you do to make more power? Just build the internals to take high RPM and open up intake and exhaust? Can you cam it at all? Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted September 17, 2020 Share #22 Posted September 17, 2020 19 minutes ago, Parr8hed said: So if carb and valve sizes are maxed out then what do you do to make more power? Just build the internals to take high RPM and open up intake and exhaust? Can you cam it at all? Cheat. 1 Link to comment Share on other sites More sharing options...
BR46 Posted September 17, 2020 Author Share #23 Posted September 17, 2020 6 minutes ago, Parr8hed said: So if carb and valve sizes are maxed out then what do you do to make more power? Just build the internals to take high RPM and open up intake and exhaust? Can you cam it at all? That's where the fun begins. I get to spend hours in the garage figuring out how much I can shave off the head and reshaping the intake and exhaust ports in the search for more power (Tim Allen grunt) There's a average of 10hp hidden in the cylinder head on the old motors. One of the reasons that my son has blown up a few motors is the motorcycle that he is racing there no aftermarket speed part available. So he has to design and make his own. Sometimes they work and sometimes they don't. 1 Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted September 17, 2020 Share #24 Posted September 17, 2020 3 minutes ago, BR46 said: That's where the fun begins. I get to spend hours in the garage figuring out how much I can shave off the head and reshaping the intake and exhaust ports in the search for more power (Tim Allen grunt) There's a average of 10hp hidden in the cylinder head on the old motors. One of the reasons that my son has blown up a few motors is the motorcycle that he is racing there no aftermarket speed part available. So he has to design and make his own. Sometimes they work and sometimes they don't. What can you do about piston rings and drag. In the straight line cars, the rings are built to have as little drag as possible, usually only sealing really tight during the power stroke. Lots of oil blow by but hey......power is king. We always took more "oil" out of the engine after a run then we put in, always sort of a sick green color contaminated by lots of alcohol and nitro. Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted September 17, 2020 Share #25 Posted September 17, 2020 15 hours ago, BR46 said: Fired up the sidecar today with a different motor today. Sweet! So, is a "sidecar" a functional motorcycle without the extra seat/wheel attached? I always thought the extra bits were the sidecar, and the main bit was still a "motorcycle", but you seem to use it as either the bit with the engine (regardless of whether it has the extra stuff attached) or maybe as a whole (engine/regular bike + extra bits). So, to us non-sidecar folks, what sort of terminology should we know (beyond the monkey)? Link to comment Share on other sites More sharing options...
BR46 Posted September 17, 2020 Author Share #26 Posted September 17, 2020 35 minutes ago, maddmaxx said: Lots of oil blow by but hey......power is king I just run the rings with factory recommend gap. Some teams have motors with a few years of racing on the motors (BMWs) I just picked up another cylinder head that I'm going to put on the flow bench and see what I can find for more power. One trick that I'm going to try that a friend of mine did in a motor that he built and holds 5 land speed records is valves from new tuner cars. The valve is lighter and shaped for better flow than the 50 year old valves that I'm running. I will have to make my own valve guides. The rules are you have to run stock valve size nothing about lighter valve material. 1 Link to comment Share on other sites More sharing options...
BR46 Posted September 17, 2020 Author Share #27 Posted September 17, 2020 41 minutes ago, Razors Edge said: Sweet! So, is a "sidecar" a functional motorcycle without the extra seat/wheel attached? I always thought the extra bits were the sidecar, and the main bit was still a "motorcycle", but you seem to use it as either the bit with the engine (regardless of whether it has the extra stuff attached) or maybe as a whole (engine/regular bike + extra bits). So, to us non-sidecar folks, what sort of terminology should we know (beyond the monkey)? Sidecar racing is basically a three wheel vehicle with a passenger. There's 7 classes of sidecars. Everything from stock motorcycles with a what we call the chair attached to F-1 that doesn't even resemble a motorcycle. F-1 sidecar with the body removed Want to go for a ride on that platform? Top speed of a F-1 is 180+ mph. Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted September 17, 2020 Share #28 Posted September 17, 2020 5 minutes ago, BR46 said: Want to go for a ride on that platform? Top speed of a F-1 is 180+ mph. I would on the bottom "finished" one! That one looks like the one in your post from several months ago? I think when we were discussing Jay Leno? It is! So what I called a sidecar is actually called the chair? The monkey is in the chair? The sidecar is the whole thing - all three wheels, engine, driver and monkey seats, etc.? Link to comment Share on other sites More sharing options...
BR46 Posted September 17, 2020 Author Share #29 Posted September 17, 2020 6 minutes ago, Razors Edge said: I would on the bottom "finished" one! That one looks like the one in your post from several months ago? I think when we were discussing Jay Leno? It is! So what I called a sidecar is actually called the chair? The monkey is in the chair? The sidecar is the whole thing - all three wheels, engine, driver and monkey seats, etc.? Correct I like to describe it as I have control of the gas and brake and only 25% of the steering. The other 75% is the co-driver/monkey that is responsible for making the sidecar turn. We use hand signals for different things like if we have a problem with front end push in a turn on the track I will give Wo46 a hand signal and she will switch what she does so we can turn better in that turn. Some monkeys will drag their bodies on the track to help make a turn. Kat will drag her hip and shoulder. She is so comfortable doing this she has waved to us as they are passing us in the turn. Celia will sit on the race track in the turn. Wo46 has scuffed her butt on the track a few times hanging out of the chair. Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted September 17, 2020 Share #30 Posted September 17, 2020 2 hours ago, BR46 said: I just run the rings with factory recommend gap. Some teams have motors with a few years of racing on the motors (BMWs) I just picked up another cylinder head that I'm going to put on the flow bench and see what I can find for more power. One trick that I'm going to try that a friend of mine did in a motor that he built and holds 5 land speed records is valves from new tuner cars. The valve is lighter and shaped for better flow than the 50 year old valves that I'm running. I will have to make my own valve guides. The rules are you have to run stock valve size nothing about lighter valve material. This is true. You don't run engines for a few seconds a couple of times and then take them apart and rebuild them. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now