Jump to content

A "sine" for RG


Wilbur

Recommended Posts

​Looks like it.  I need to get the manual out again and check out the problem determination section.

 

​It appears to be throwing error code A451ZF450

"Error Code A451ZF450 - CCJ - Crappy Content Jam.  This error is typically caused by the insertion of crappy content.  Correction - unplug unit from its power source, tilt unit with entry door down and shake.  Under most circumstances this will unjam crappy content and crappy content will easily fall from the meter case.  If this fails to correct the problem, please refer to page 397 - Rebuilding Meter."

 

  • Heart 3
Link to comment
Share on other sites

​It appears to be throwing error code A451ZF450

"Error Code A451ZF450 - CCJ - Crappy Content Jam.  This error is typically caused by the insertion of crappy content.  Correction - unplug unit from its power source, tilt unit with entry door down and shake.  Under most circumstances this will unjam crappy content and crappy content will easily fall from the meter case.  If this fails to correct the problem, please refer to page 397 - Rebuilding Meter."

 

​If it ever gives PC LOAD LETTER, take it out in a field and beat the crap out of it!  :D

 

 

Link to comment
Share on other sites

​These are some old jokes I'm using.  I've assembled quite a few.  Someday I will compile them into a single volumn.

​Maybe you should talk to UglyBob's publisher.  If you get them together quickly maybe you 2 could work out a 2 for one deal.

Link to comment
Share on other sites

OH, and the good new is, I was able to get that crap @Wilbur called a parody out of the meter.  It should be good to go.

Resolution - 2 sacks with a pedal wrench.  15mm baby, no SAE crap here.

And I saved myself a trip to the hardware store and a discussion about parody bits with the young man that works there that never finished 10th grade. 

Link to comment
Share on other sites

OH, and the good new is, I was able to get that crap @Wilbur called a parody out of the meter.  It should be good to go.

Resolution - 2 sacks with a pedal wrench.  15mm baby, no SAE crap here.

And I saved myself a trip to the hardware store and a discussion about parody bits with the young man that works there that never finished 10th grade. 

​Did you remove the bias? 

Edited by Wilbur
Link to comment
Share on other sites

Sa

OH, and the good new is, I was able to get that crap @Wilbur called a parody out of the meter.  It should be good to go.

Resolution - 2 sacks with a pedal wrench.  15mm baby, no SAE crap here.

And I saved myself a trip to the hardware store and a discussion about parody bits with the young man that works there that never finished 10th grade. 

​Sacking with a pedal wrench is quite an achievement.  

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...