Further Posted September 9, 2019 Share #1 Posted September 9, 2019 I need to do this. I've done the plumbing part but never the install of the enclosure. Any tips & heads up appreciated Link to comment Share on other sites More sharing options...
Chris... Posted September 9, 2019 Share #2 Posted September 9, 2019 We did it, but paid someone to do the work. 1 1 1 Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted September 9, 2019 Share #3 Posted September 9, 2019 Yep. Bath fitters did it for me in one day. It wasn't extremely expensive. They come in and take detailed measurements. Then they order the custome replacement. They showed up with the replacement and sledge hammers, blew out the old tub after disconnecting all the fittings and drains. They blew out all the old wall tile. They lay in the base, hook up the drain pipe and bring in a single unit that is all three walls, pre creased at the corners so it folds nicely into shape. New fittings with a bit of plumbing and voila all cleaned up and ready to use. You can get some custom options if you want. Perhaps a seat at one end and some grab handles. 2 Link to comment Share on other sites More sharing options...
Ralphie ★ Posted September 9, 2019 Share #4 Posted September 9, 2019 I would go the maddmaxx route. 1 Link to comment Share on other sites More sharing options...
Wilbur ★ Posted September 9, 2019 Share #5 Posted September 9, 2019 Only about 300 times so I would be little help. 1 Link to comment Share on other sites More sharing options...
Further Posted September 9, 2019 Author Share #6 Posted September 9, 2019 1 minute ago, wilbur said: Only about 300 times so I would be little help. ? Link to comment Share on other sites More sharing options...
Guest Posted September 9, 2019 Share #7 Posted September 9, 2019 Did that last year. Tore out separate tub and shower then built a door-less walk-in shower. Link to comment Share on other sites More sharing options...
Scrapr ★ Posted September 10, 2019 Share #8 Posted September 10, 2019 The pro (from Dover) use a system called Kerdi. Read upon it. The pan is super important. You don't want to redo that. I don't know a lot about it. But I think the layers are base-kerdi-wonderboard-tile. Probably want a curbless shower. I like those a lot. https://www.schluter.com/schluter-us/en_US/showers I believe there is a message board for tile guys called John Bridge (???) Step lightly over there. I've heard they are not especially nice to HO. Or is that the HVAC board? 1 Link to comment Share on other sites More sharing options...
Further Posted September 10, 2019 Author Share #9 Posted September 10, 2019 30 minutes ago, wilbur said: Only about 300 times so I would be little help. I think you would be very helpful. Link to comment Share on other sites More sharing options...
Wilbur ★ Posted September 10, 2019 Share #10 Posted September 10, 2019 28 minutes ago, Further said: I think you would be very helpful. Well, it really depends what WoFurther needs for access. Does she take a wheelchair into the shower? If so, sills are problematic. If you want a custom look like Chris's example, you can still do it on your own with a little patience. If you do it on your own, talk to someone at a tile centre of HD about Schluter kits for your dimensions. They are expensive but they eliminate all water leak potential. Feel free to PM me for further. If you want a quick and easy fix, then Bathfitter does a good job. They are a little motel looking to me but they are easy to maintain and last a long time. Link to comment Share on other sites More sharing options...
Further Posted September 10, 2019 Author Share #11 Posted September 10, 2019 She can still do a threshold. I'm planning to tear out the existing tub / shower one piece unit and install a 4 piece step in shower. I want to minimize drywall damage. The bathroom has wallpaper that is in excellent shape and I would prefer not to replace it right now. So some kind of trim around the new unit to transition from paint to wallpaper. 1 Link to comment Share on other sites More sharing options...
Popular Post Tizeye Posted September 10, 2019 Popular Post Share #12 Posted September 10, 2019 I did and will represent the DIY approach. Probably spent $1000. Shocked at the construction when I pulled the wall out. Additional work re-framing wall, adding insulation - none prior, changing PBC pipes to PEX, dual pane window.. Hate to think what it cost if had done...or the shortcuts they would take never to be seen until torn out. 6 1 Link to comment Share on other sites More sharing options...
Chris... Posted September 10, 2019 Share #13 Posted September 10, 2019 Our problem was that the plumbing was all new for that location. My plumbing skills do not extend that far. Link to comment Share on other sites More sharing options...
Tizeye Posted September 11, 2019 Share #14 Posted September 11, 2019 I don't know if you have them in your area, but Floor & Décor, besides having far greater selection than HD, is great to just walk through. They will have some built out displays that gives ideas on design. The one I pictured above was based on one of their displays as I never would have thought of the tile inlays. Stick to ceramic or porcelain tiles. While travertine may be tempting, it is also very high maintenance. It is porous and requires a sealing cote which has to be repeated every three years or so. Link to comment Share on other sites More sharing options...
Indy Posted September 11, 2019 Share #15 Posted September 11, 2019 Currently having both upstairs bathrooms redone. Paying someone to do the tile work and install a new tub in the kids bathroom. Kids bathroom needed redone, the master we thought was good as it was a nice walk in, but we developed a leak. After tearing it out, saw how badly it was done behind the tile, and really glad I got someone really good doing the work so I know it's done right and will be trouble free for years to come. He did a poured cement pan in our walk in shower. We put in a fiberglass tub, he also set it in cement so the bottom of it is completely solid now, not at all like stepping into a fiberglass tub. I am doing all the finish work. New flooring, sitting toilets, trim work, drywall work and painting. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now