Razors Edge ★ Posted May 28, 2020 Share #1 Posted May 28, 2020 ...as a braking surface? And what kind of durability are you seeing? Metal versus Resin Resin brake pads - also referred to as organic or semi-metallic pads - are made from a mix of fibers held together by resin. Typically, those materials are softer than their metal counterparts, which usually means they are quieter when braking. Metal brake pads, meanwhile, are sometimes called metallic or sintered, and you guessed it, are made from metallic particles fused together. Metal brake pads are often used for OEM spec, meaning that’s what you’ll go home with if you buy a new bike from a bike shop. This is due to metal brake pads' versatility and their ability to perform in a wide variety of conditions. This is also why you’ll find metal brake pads on most cars and motorcycles. Link to comment Share on other sites More sharing options...
ChrisL Posted May 29, 2020 Share #2 Posted May 29, 2020 I haven’t yet replaced pads on any of my disc brake bikes so I don’t know? I gave my first disc bike to my cousin who replaced the pads. Anthem & new crosser doesn’t need it yet... Link to comment Share on other sites More sharing options...
donkpow Posted May 29, 2020 Share #3 Posted May 29, 2020 I prefer the non-metallic or resin pads, for sure. I find the grinding sound and feel from metallic intolerable. There may be lower braking performance with the resin pads but for an every day bike on the roads, they are good enough. 1 Link to comment Share on other sites More sharing options...
bikeman564™ Posted May 29, 2020 Share #4 Posted May 29, 2020 I replaced my fat bike pads w/ resin because my LBS guy said they'd be quieter. But I can't really tell any difference They stop, I know that 1 Link to comment Share on other sites More sharing options...
Longjohn ★ Posted May 29, 2020 Share #5 Posted May 29, 2020 No disc brakes on my bikes but on my other vehicles I always go with ceramic. Link to comment Share on other sites More sharing options...
ChrisL Posted May 29, 2020 Share #6 Posted May 29, 2020 I often heard that discs were more maintenance than rim brakes. Maybe to an extent they are but both systems have been set it & forget it for me. My Anthem had a warranty replacement so they changed the lever & re bled them. Other than than checking the pads for wear I haven’t messed with them. 1 Link to comment Share on other sites More sharing options...
donkpow Posted May 29, 2020 Share #7 Posted May 29, 2020 32 minutes ago, ChrisL said: I often heard that discs were more maintenance than rim brakes. Maybe to an extent they are but both systems have been set it & forget it for me. My Anthem had a warranty replacement so they changed the lever & re bled them. Other than than checking the pads for wear I haven’t messed with them. I find I have to clean the rotors more than I anticipated. Link to comment Share on other sites More sharing options...
ChrisL Posted May 29, 2020 Share #8 Posted May 29, 2020 34 minutes ago, donkpow said: I find I have to clean the rotors more than I anticipated. Is that due to road grime or some other reason? I don’t clean mine unless they are getting some over spray from a wash down. If they get wet I get a little squealing at first but it goes away. Link to comment Share on other sites More sharing options...
donkpow Posted May 29, 2020 Share #9 Posted May 29, 2020 2 hours ago, ChrisL said: Is that due to road grime or some other reason? I don’t clean mine unless they are getting some over spray from a wash down. If they get wet I get a little squealing at first but it goes away. Yeah, road grime. The front starts to make too much noise, so I clean it. 1 Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted June 16, 2020 Share #10 Posted June 16, 2020 Shimano stated that resin pads should be used on the centerloc rotors I chose but since Avid Roaddisc units come with metallic pads that's what I use. I keep waiting for some cat a strophic failure but they just keep on stopping me. Now, the Shimano rotors did have a shinier finish than I'm used to so perhaps that's something they know about that I don't. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now