Razors Edge ★ Posted June 25, 2020 Share #1 Posted June 25, 2020 ...but the rest of the doodads are ready to go. In addition to the wheelset (inexpensive Shimano GRX WH-RS370), I have a set of 700x32 Contis tubeless tires at the ready. I just have to decide if I want to go with the 700x28 all season Contis and tubes for this "commuter" wheelset, and go the tubeless set-up route with the bike's current 700x38 multi-surface Spec Pathfinder Pro, 2Bliss Ready tires & wheels, or if I go tubeless with the new wheels & the 32s and wait a little with the 38s to see how I like the whole process. Regardless, having the new wheelset will be nice as a way for me to futz around with a new process/concept, and test out how capable I am setting up and maintaining tubeless. 1 Link to comment Share on other sites More sharing options...
donkpow Posted June 25, 2020 Share #2 Posted June 25, 2020 Interesting. Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted June 26, 2020 Share #3 Posted June 26, 2020 I've been using a set of even less expensive Shimano WH-05's for a couple of years and the have been trouble free. I think you will like yours. This is the first wheelset I've used in a long time that I didn't build in a traditional manner with Shimano hubs and DT spokes on Mavic Rims. Link to comment Share on other sites More sharing options...
ChrisL Posted June 28, 2020 Share #4 Posted June 28, 2020 On 6/25/2020 at 7:22 AM, Razors Edge said: ...but the rest of the doodads are ready to go. In addition to the wheelset (inexpensive Shimano GRX WH-RS370), I have a set of 700x32 Contis tubeless tires at the ready. I just have to decide if I want to go with the 700x28 all season Contis and tubes for this "commuter" wheelset, and go the tubeless set-up route with the bike's current 700x38 multi-surface Spec Pathfinder Pro, 2Bliss Ready tires & wheels, or if I go tubeless with the new wheels & the 32s and wait a little with the 38s to see how I like the whole process. Regardless, having the new wheelset will be nice as a way for me to futz around with a new process/concept, and test out how capable I am setting up and maintaining tubeless. I seriously hope I’m wrong but my gut tells me your gonna need more sealant as most of it will end up on your garage floor... I do recommend getting a core remover & sealant injector. That way you can seat the bead without sealant & then inject it through the valve stem once seated. I buy the containers of sealant that looks like an oil can as it’s cheaper in bulk, I have 2 tubeless bikes and it keeps. BTW my GRX wheels have been absolutely bullet proof. Love love love them. Did I mention I love them? Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted June 29, 2020 Author Share #5 Posted June 29, 2020 On 6/26/2020 at 5:44 PM, maddmaxx said: I've been using a set of even less expensive Shimano WH-05's for a couple of years and the have been trouble free. I think you will like yours. Good to know! On 6/27/2020 at 9:54 PM, ChrisL said: BTW my GRX wheels have been absolutely bullet proof. Love love love them. Did I mention I love them? Also good to hear. My original Roubaix - back in 2006 - came with Ultegra level Shimano wheels. Totally bullet proof and I have NEVER done any maintenance on them. Sadly, they were not 11sp compatible, so the rear wheel sits unused in the garage as I have no 8-9-10sp bikes anymore. I still use the front wheel with my winter tires. On 6/27/2020 at 9:54 PM, ChrisL said: I seriously hope I’m wrong but my gut tells me your gonna need more sealant as most of it will end up on your garage floor. It may happen! This is my "experimental" phase of tubeless, and I do expect to mess things up. I looked at the bottle & injector path, but figured I'd try the bottles first and see if they worked, but I do suspect/worry I will be making a few trips to the LBS for help and/or supplies. 1 Link to comment Share on other sites More sharing options...
donkpow Posted June 29, 2020 Share #6 Posted June 29, 2020 On 6/27/2020 at 9:54 PM, ChrisL said: a core remover Even though I have never gone down the sealant path, a core removal tool has allows been in my tool box. I still have several for shrader valves. I believe none of my presta valved tubes have a removable core. Link to comment Share on other sites More sharing options...
ChrisL Posted June 29, 2020 Share #7 Posted June 29, 2020 7 minutes ago, donkpow said: Even though I have never gone down the sealant path, a core removal tool has allows been in my tool box. I still have several for shrader valves. I believe none of my presta valved tubes have a removable core. Most tubeless valves have a removable core so you can insert sealant without breaking the rim/tire bead. I am not aware of any valves on tubes having a removable core. Maybe there are but I have never tried... Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted June 29, 2020 Author Share #8 Posted June 29, 2020 5 minutes ago, donkpow said: Even though I have never gone down the sealant path, a core removal tool has allows been in my tool box. I still have several for shrader valves. I believe none of my presta valved tubes have a removable core. I've accidentally unscrewed a presta core before. INSTANT flat I think one of my spoke tools fits the valve core perfectly and can be used to screw them in/out. The Stans valve is definitely "removable". Regardless, I will let folks know what catastrophes occur for me Unless, of course, @jsharr is willing to swing by with his son and do this darn project for me???? 1 Link to comment Share on other sites More sharing options...
donkpow Posted June 29, 2020 Share #9 Posted June 29, 2020 2 minutes ago, ChrisL said: Most tubeless valves have a removable core so you can insert sealant without breaking the rim/tire bead. I am not aware of any valves on tubes having a removable core. Maybe there are but I have never tried... I'd have to run it down but I think the valves are the same, tube and tubeless. Tubeless obviously 'requires' a removable core. 1 Link to comment Share on other sites More sharing options...
jsharr ★ Posted June 29, 2020 Share #10 Posted June 29, 2020 We should be by sometime soon. Leave a door open for us. Link to comment Share on other sites More sharing options...
ChrisL Posted June 29, 2020 Share #11 Posted June 29, 2020 43 minutes ago, Razors Edge said: Good to know! Also good to hear. My original Roubaix - back in 2006 - came with Ultegra level Shimano wheels. Totally bullet proof and I have NEVER done any maintenance on them. Sadly, they were not 11sp compatible, so the rear wheel sits unused in the garage as I have no 8-9-10sp bikes anymore. I still use the front wheel with my winter tires. It may happen! This is my "experimental" phase of tubeless, and I do expect to mess things up. I looked at the bottle & injector path, but figured I'd try the bottles first and see if they worked, but I do suspect/worry I will be making a few trips to the LBS for help and/or supplies. I haven’t babied my rims and have taken them on some rocky trails and not even a minor wobble. I like how the wider rim profile allows for more of a U shaped tire profile with no bulge (with 32’s). My Anthem has older carbon rims and they have the same inner diameter as the GRX wheels and my 2.2 are shaped like light bulbs. I can sometimes feel the tire flexing on rocks & ruts which I never do on my gravel set up. Maybe with much wider tires it might do that but 32-38 I think would be ideal. 1 Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted June 29, 2020 Author Share #12 Posted June 29, 2020 Just now, jsharr said: We should be by sometime soon. Leave a door open for us. It's always unlocked. The garage code is "5454", so you can also just come in that way. 1 Link to comment Share on other sites More sharing options...
jsharr ★ Posted June 29, 2020 Share #13 Posted June 29, 2020 4 minutes ago, Razors Edge said: It's always unlocked. The garage code is "5454", so you can also just come in that way. I forgot your address though. Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted June 29, 2020 Author Share #14 Posted June 29, 2020 1 minute ago, ChrisL said: I haven’t babied my rims and have taken them on some rocky trails and not even a minor wobble. I like how the wider rim profile allows for more of a U shaped tire profile with no bulge (with 32’s). My Anthem has older carbon rims and they have the same inner diameter as the GRX wheels and my 2.2 are shaped like light bulbs. I can sometimes feel the tire flexing on rocks & ruts which I never do on my gravel set up. Maybe with much wider tires it might do that but 32-38 I think would be ideal. Wide rim are "in" now for exactly what you are seeing with that lightbulb profile. Aerodynamics (road tires) and handling (across all types) seem to be adversely affected by narrow rims/wide tires that folks are trying out these days. Wider rims address those issues. Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted June 29, 2020 Author Share #15 Posted June 29, 2020 11 minutes ago, jsharr said: I forgot your address though. Just call me when you are on I-66 and I will give you the best directions to get here depending on traffic. Link to comment Share on other sites More sharing options...
Square Wheels Posted June 29, 2020 Share #16 Posted June 29, 2020 1 hour ago, jsharr said: I forgot your address though. For a small service charge, I'll provide his IP. Link to comment Share on other sites More sharing options...
jsharr ★ Posted June 29, 2020 Share #17 Posted June 29, 2020 18 minutes ago, Square Wheels said: For a small service charge, I'll provide his IP. For an even smaller charge, I will send you his home address. Link to comment Share on other sites More sharing options...
bikeman564™ Posted June 30, 2020 Share #18 Posted June 30, 2020 Good luck I've did my fat bike tubeless, not as much of a PITA as I thought. I did spill some sealant When I add sealant, I go thru the valve core w/ an Stan's injector thingie. Works very well. Bikeman tip: make sure you blow oot the stem w/o sealant first, because there may be some dried sealant in the stem. 1 Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted June 30, 2020 Author Share #19 Posted June 30, 2020 The wheels arrived. They come with tubeless valves! Also, is it bad news when you hurt yourself simply unboxing the darn things??? Anyway, I'll probably not get to them until this weekend at the earliest as holiday weekends are actually busier than regular ones around my house. 1 Link to comment Share on other sites More sharing options...
ChrisL Posted June 30, 2020 Share #20 Posted June 30, 2020 17 minutes ago, Razors Edge said: The wheels arrived. They come with tubeless valves! Also, is it bad news when you hurt yourself simply unboxing the darn things??? Anyway, I'll probably not get to them until this weekend at the earliest as holiday weekends are actually busier than regular ones around my house. Cool! Yeah chuck the valves that came with the wheels & use the stans. Mine give me grief every time. Not enough grief to go through the hassle of setting them back up tubeless tho. 1 Link to comment Share on other sites More sharing options...
ChrisL Posted July 8, 2020 Share #21 Posted July 8, 2020 On 6/30/2020 at 7:35 AM, Razors Edge said: The wheels arrived. They come with tubeless valves! Also, is it bad news when you hurt yourself simply unboxing the darn things??? Anyway, I'll probably not get to them until this weekend at the earliest as holiday weekends are actually busier than regular ones around my house. So did ya get them taars mounted up?!? Link to comment Share on other sites More sharing options...
Razors Edge ★ Posted July 9, 2020 Author Share #22 Posted July 9, 2020 19 hours ago, ChrisL said: So did ya get them taars mounted up?!? Not yet! I did mount the brakes to the wheels. That was easy 1 Link to comment Share on other sites More sharing options...
ChrisL Posted July 9, 2020 Share #23 Posted July 9, 2020 20 minutes ago, Razors Edge said: Not yet! I did mount the brakes to the wheels. That was easy Yeah that is the easy part. Cool, keep us posted! Link to comment Share on other sites More sharing options...
maddmaxx ★ Posted July 22, 2020 Share #24 Posted July 22, 2020 On 7/9/2020 at 1:21 PM, Razors Edge said: Not yet! I did mount the brakes to the wheels. That was easy Did you get the rotors pointing the right way? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now